Water Heater Stopped Suddenly? Here's What to Do Now
Water Heater Stopped Suddenly? Here's What to Do Now
Blog Article
How do you actually feel when it comes to Hot Water Heater Repair?
Lots of modern-day residences use an electrical water heater for their heating unit, due to its convenience and also convenience of use. Nevertheless, similar to any other electrical appliances, problems might develop with its usage, unexpectedly. It can be actually irritating to get up to a chilly shower rather than a hot one or having your bathroom with water that isn't warm adequate and even also warm. Whatever the instance may be, water heater problems can be fairly stressful. Fortunately, we have actually made a listing of possible services to your hot water heater issues. There are a number of aspects that could cause most of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the main power supply for safety and security. Whatever the issue is, getting it repaired should not pose excessive of an issue if you comply with these actions:
Inspect Your Power Supply:
As basic as this might seem, it is very essential. Without sufficient power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, merely turn it on and off again. Change any kind of damaged or worn-out fuse. Test the home appliance with power after these changes to see if it's currently functioning.
Inspect the Burner in the Water Heater:
If it's not a power issue, then try having a look at your burner if it is still working. Check each of your heating elements to make sure the issue isn't with any of them. If any of them is damaged, replace that component and then examine whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to inspect the temperature level settings on your top thermostat. Make sure the breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature level reset above the thermostat. This ought to help heat the water. Turn the breaker back on and also check if the issue has been solved.
Call An Expert:
If after changing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you might need to call a specialist plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have been switched over or it might be undersized for the amount of warm water required in your house. Whatever the situation may be, a professional plumber would certainly help resolve the trouble.
Final thought
Hot water heater problems are not constantly significant. Much of them are due to minor problems like a blown fuse or worn-out burner. Changing the malfunctioning components must work. However, if you are still incapable to fix the problem, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed reading our part about What Would Cause My Electric Water Heater to Stop Working?. Thanks so much for taking a few minutes to read our short article. Loved our content? Please share it. Let another person locate it. Thank you so much for your time invested reading it.
Timely fixes available. Report this page